| Available options: |
Output hopper: side eject or FIFO elevator (First In - First Out). |
| Character fonts: |
Embossing or indenting: Simplex1, Simplex3, OCRB1,Block, Block USA, Double Block, Double Long Block, Maxi Block; negative embossing (Elite Dog Tag). |
| Communication |
Interface: Serial RS232 port.
|
| Protocols: CIM, Xon-Xoff and Multiembosser. |
| Electrical requirements: |
117 V / 60Hz - 230 V / 50 Hz |
| Feeding System |
Fonts: Standard Windows fonts including special characters and symbols. |
| Input hopper capacity: 250 plates (0,4 mm) variable dimensions.
|
| Output hopper capacity: side eject or FIFO elevator (250 plates).
|
Plates dimensions:
| Width: min 30 mm - max 115 mm |
| Height: min 21 mm - max 90 mm |
| Thickness 0.4 ÷ 0.9 mm |
|
| Logo dimensions: Max area about 84 cm2. |
| Logos: Up to 2 at a time, resident in equipment. |
| Stamping area: Full plate except 1 mm from the top and left/right edges and 7 mm from the bottom edge. Avoid the edges in order to not damage the stylus. |
| Stamping pressure: Adjustable depending on material stamped. |
| Stylus: Widia |
| Memory and Data |
Data format: 50 fields of 80 characters each (Name, Fixed data, Counters, etc.) |
| Storable formats: 10 with formatted downloading. |
| Software/Firmware: : SWORD PC application proprietary software. Automatic date field; plate archive; DBIII, DBIV, Excel, MS Access file compatibility. Self diagnostic, automatic repetition of faulty plate personalisation, clearable and non-clearable counters, set-up procedures (via external keyboard). |
| Miscellaneous: |
2-line by 40 character LCD display for diagnostic visualisation. Lithium back-up battery (warning of low battery level on LCD). Security operation with key lock. Emergency stop RED button. Machine state indicator lamps. LCD Edit (via external keyboard). |
| Operating temperature: |
5C ÷ 40C/41F ÷104F |
| Performance: |
Depending on font and size (e.g.: ht 6 mm = 1 character/4 seconds). |
| Physical Dimensions(WxDxH): |
630x740x380 mm |
| Power consumption: |
100 watt |
| Relative humidity: |
30% - 90% non condensing |
| Weight: |
55 Kg |
| • |
Reliable stylus stamping for logos, Windows fonts and special characters of all sizes |
| • |
Easy manual or automatic loading and unloading. New innovative 'single point access' manual feed solution |
| • |
Near end input / near full output hopper plate sensors for continuous production |
| • |
Latest generation electronics with FLASH memory technology (accessible via external service port) |
| • |
Stamps special characters such as country specific characters and symbols. |
| • |
Stamps up to two logos at a time in addition to text. Variable logo orientation. |
| • |
Suitable for a variety of metals, including stainless steel, aluminum, copper and brass. |
